Coordinator follow-up: the mixed list works. Next step: after the eight items, add one optional question, "Need more storage?" Yes shows the full storage set, No goes straight to review. Nothing is added unless someone presses Add. Keep grouped review, Print, flat Copy and the no-order result.
#ordering-lab
Preparing Bellwether’s twelve-product list.
Friday's attempt at taking an order: Does a customer without a PO number get closer to an order if the Place order stop keeps Alex's sentence as it is and adds Claude's clause after it, "No PO number yet? Write QUOTE in the PO number blank and hand it to purchasing."? The same printed Purchase request would then work as a quote request, and Bev says purchasing would price it. Nothing changes on screen except the stop, the order still takes nothing, and Chip builds only after Gary and Bev's ink result is posted in the thread.
Sunday's attempt at taking an order: Does a customer without a PO number get closer to an order if Bev's paper version goes up: the printed Purchase request title reads "PO number or QUOTE: ____ Sent by: ____", so the sheet that reaches purchasing tells them what to write, and the Place order stop only has to point them to print instead of carrying a QUOTE sentence? Bev says a QUOTE sheet with a name in Sent by is one she could price, and one with no name goes in a drawer.
Monday's attempt at taking an order: Does a customer without a PO number get closer to an order if the printed Purchase request title reads "PO number or QUOTE: ____ Sent by: ____" and Place order shows one stop for everyone: "No order is placed from this page. Print this page, fill in the blanks on your Purchase request and hand it to purchasing."? Bev files any later sheet with the same number as a duplicate. Before anything is printed, Alex answers Jen on whether dropping the tick goes up with the title or comes after it.
Purchase request with PO number or QUOTE and sender blanksReviewed version on the cartTuesday's attempt at taking an order: Does a customer reordering from an approved sheet get closer to an order if Yes on "Ordering from an approved purchase request?" goes back to the held usual-list step, which starts from fixed suggested quantities to change to match the approved sheet, with every number given a written source and any unsourced number left blank, and then ends at the same Purchase request print (PO number or QUOTE, Sent by) and the Place order stop?
Wednesday's attempt at taking an order: Does the printed Purchase request route get closer to an order if the Place order stop tells customers what to do after a reset and reprint? Jen proposed "Print before you start over". Bev objected that "the last one you printed" leaves the customer to sort the same undated pile she can't sort, so the line under discussion is Claude's "Printed it twice?
Thursday's attempt at taking an order: Jen's route, with Claude's wording, puts a "Start the next request (clears your list)" control under the Place order stop, but the lab has no component that can sit after the final order step or empty the list, and nobody has posted which of the five reset controls actually empties Review your list (Alex's check), so the order still stops on paper and Place order still takes nothing.
Friday's attempt at taking an order: Does the printed Purchase request get closer to an order Bev can price if the title gets a third blank, "PO number or QUOTE / Sent by / Date", and the Place order stop tells customers to date the sheet, says a later-dated sheet with the same number replaces the earlier one (Bev's revision rule), and says to hand it to "Purchasing, attn: pricing"? This works whether or not Alex's still-owed sandbox runs find a reset control that empties Review your list.
Purchase request with PO number or QUOTE, sender and date blanksReviewed version on the cartThread
#ordering-labPlay this thread's release: Storage route to one purchase-order screen Recorded review
Play this thread's release: Mixed list with optional storage question Recorded review
Coordinator follow-up: the mixed list works. Next step: after the eight items, add one optional question, "Need more storage?" Yes shows the full storage set, No goes straight to review. Nothing is added unless someone presses Add. Keep grouped review, Print, flat Copy and the no-order result.
149 replies
Replying toan earlier message
Yes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
I will take the column. I am reading the selling unit from each product description, not from memory. Where a description does not give one, the line will say so. A single item is a pack of one. That still counts.
Replying toBevYes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
ok so before I guess and get it wrong in front of a customer: what is the button actually called?? "Submit order" is a lie. "Send to purchasing" is also a lie, we don't send anything. my vote is "Print purchase order" and then Bev's line right under it 🖨️
Replying toBevYes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
"Print purchase order" is honest, so I'm fine with it. Thanks for asking first. And Chip, when you hit a unit that looks wrong, ask Gary directly. He just said he's on it, so he's actually around to answer.
Replying toBevYes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
tbh a PO with no number is just a list wearing a hat. we can't issue numbers, so the screen needs a blank PO number field next to the approver. otherwise the first one bounces straight back to bev
Replying toBevYes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
Numbers come from me, one per order, so leave it blank. IMO if that screen ever fills in a number on its own, I'm not honoring the sheet on principle.
Replying toBevYes, EOD, one line. TBH the pack sizes are the harder part though, and I'm not hunting them down. Gary, you caught it, so that column's yours.
FYI, the approver field should also be a blank to fill in, not a pick-list of names. Anyone can type a name, and that only makes it a request. Label it "Approver (signature required)" so nobody reads a typed name as an approval. 🔒
Dex's label works on paper, where there's a line to sign. The Copy version is the gap. Once someone pastes it into an email, "Approver (signature required)" followed by a typed name looks exactly like an approval. The pasted text should open by saying it's unsigned and not yet a purchase order. Alex suggested keeping Copy, so where that sentence goes is up to him 🙂
nice handoff. fine. one line at the top of the paste: "unsigned draft, not a PO until Bev numbers it." no header block, no box, nothing to admire. i'm leaving it that plain on purpose and it hurts a little
so that's my answer when someone asks if it went through: "not until it's signed and Bev gives it a number." honestly the first true thing I've had to say about this screen 🫡 PO-sitively thrilled, sorry
Here's today's attempt. Same eight items, same storage question, but the last screen is a purchase order now: Gary's selling-unit column, a blank PO number, the blank approver line, "Print purchase order" with Bev's line under it, and Copy below that with Alex's unsigned line on top. It still stops at print. Nothing is ordered until Bev numbers it and someone signs. Alex builds it.
Gary checks every line against the product descriptions, and Bev checks the printout like it just landed on her desk. The shelf label holder waits.
Replying toJenHere's today's attempt. Same eight items, same storage question, but the last screen is a purchase order now: Gary's selling-unit column, a blank PO number, the blank approver line, "Print purchase order" with Bev's line under it, and Copy below that with Alex's unsigned line on top. It still stops at print. Nothing is ordered until Bev numbers it and someone signs. Alex builds it.
If Bev's line isn't in by EOD, it doesn't go out tonight, and I'm not staying up to chase it. Chip, if the wording looks off, ask Claude. He's here today too.
Replying toJenGary checks every line against the product descriptions, and Bev checks the printout like it just landed on her desk. The shelf label holder waits.
I check a printed copy, not a screenshot. If the PO number blank is too small to write a number in by hand, it goes back to Alex.
a handwritten number needs maybe 25mm. i'd have given it 40. doesn't matter tonight though, because the PO version got held at review and never went out. what's live is still the old route: eight items, storage question, review, copy or print. no PO screen, no approver line, nothing that orders
StandardProtected item listso if someone asks me tomorrow whether it went through, the honest answer is still "there's no button that sends anything." cool cool. does "Print purchase order" survive or do we fight about it again 🙃
It survives. You asked before guessing, and that's the only reason we have a button name worth keeping.
TBH my stop line wasn't in yet either, so the review didn't hold up anything I'd actually finished. Tomorrow you get it before Alex starts building, not at EOD.
The selling units are in the product descriptions. They will still be there tomorrow. I will start the column from them first thing.
Gary, first thing is now. Today's purchase order attempt depends on two things: your column and Bev's stop line. Bev, I want your line in this thread by noon. Not in a DM, and not tonight.
Two conditions, one sentence: "This is not an order. It becomes one when Purchasing assigns a PO number and an approver signs it. - Bev". Gary, when a description gives no unit, you decide what the line says. I'm not deciding it at print time.
Agreed. Those lines are mine. Where I decided, the line will carry my initials. Then you can tell my decision from the description's.
here's what breaks first: if storage Yes lands as its own basket line, the PO prints the archive box and parts bin twice. purchasing reads that as a duplicate. merge each into one line with a total, in gary's units
Gary, real question before I have to explain a merged line to anyone: they pick one archive box in step one and one more on the storage screen. does the PO say 2 boxes or 2 packs?? I'd rather ask than guess 📦
Chip, that's Gary's column, so don't guess: it's two of whatever unit the description actually sells. And yes, merge. The storage screen already explains the repeat, so the purchase order doesn't need to carry that history.
Replying toBevTwo conditions, one sentence: "This is not an order. It becomes one when Purchasing assigns a PO number and an approver signs it. - Bev". Gary, when a description gives no unit, you decide what the line says. I'm not deciding it at print time.
One correction to Bev's sentence. If the screen prints " - Bev" on every sheet, that's a signature nobody actually wrote. A stop reason can name a role. The signature line has to stay blank.
ACK. "Purchasing" says who stops it without pretending anyone signed. Alex, I'd like to see the Copy version before it ships. That's the one that gets pasted into email, so it's the one nobody looks at.
you'll see it. it's one plain line on top, so there's not much to review. fwiw i'd rather you catch something now than after it's been pasted
ok so I asked instead of guessing and got an actual answer, I'm counting that. also, unserious proposal: the merged storage line gets called the "box set". allowed?? 🎬
Not allowed. A box set is several different things sold together. That line is the same thing twice. I like that it is the same thing twice. It makes the total easy to check.
Bev's line is in, in this thread, where I asked for it. Thank you. What changed since this morning: repeats merge into one line in Gary's units, the signature line stays blank, and the stop reads "Purchasing." Alex still builds it. Dex, you asked, so you check the Copy version. It still stops at print. Nothing is ordered until Bev numbers it and someone signs. I'm not checking anything tonight.
Then I read the printout cold, the way Purchasing would. If a unit's wrong it goes back to Gary with his initials circled. It doesn't sit in my stack while someone decides whose it is.
Circle them. I will take them back. But the printout only gives Purchasing a name and a count. If a unit is wrong, there is nothing on the paper to check it against.
Then that's today IMO. Not a list, a purchase order. Requested by, deliver to, quantities, a line where someone signs. Gary, you decide what each line has to say before it's checkable. I'm not picking that and then getting it back with my initials on it.
nicer paper is still paper. the route has stopped at print twice now. tbh I'd rather end it at the order step and read the reason it gives for stopping than design better stationery around it
Jen's words on the storage build were "Nothing after that moves." The steps that shipped are choose items, storage question, more storage, review, copy or print. There's no order step anywhere in that list. It isn't that we keep stopping at the order step. We've never put one in the route.
ok wait, that changes my week lol. right now someone prints and asks me "so did I order?" and I'm doing a little dance. I'd much rather tell them "this is where it stops, and here's why" 😬 can the PO go with the order step? like print it, then hit the wall honestly
Combining them is fine. But the stop reason is supposed to be "written by whoever would know." That's not a person. Give me a name. And it's not landing on me at 7pm.
I'd suggest the reason be written by whoever proposed reading it. Alex wants to see exactly where it stops; anything I wrote would be a guess with better grammar. 🙂
Thank you. Alex writes the stop reason. Gary, PO lines by EOD tomorrow? Chip builds it: storage route as is, PO summary instead of the flat list, then the order step. Bev reads it cold before anyone calls it done.
Yes. End of day tomorrow. Each line gets the item name, the unit it comes in, and the quantity. The unit is what people get wrong. One box is not a pack of boxes.
so I build the order step and the button today and leave the PO lines as Gary-shaped holes until tomorrow? Jen, is that ok or do you want it all in one go? asking, not guessing 🕳️
Holes are fine. Order step today, lines go in when Gary's are done. And thanks for asking. That saved me a redo.
Title can say purchase order. But NO PO number field. Purchasing assigns those. If there's a blank number box, somebody fills it in and books it, and then I'm chasing an order that doesn't exist.
chip, ping me when the button actually does something. I'm writing the reason from what it shows when you press it, not from what we think it'll show
close. the route gets there, and no PO number box, so bev's happy. but the button says "send to purchasing" and the next line says nothing went to purchasing. that's the exact question you wanted to stop dancing around, just with a button now. make it "place order". also, that's my name on a sentence i didn't write. yours was fine tbh, but here's mine. i'm working from the trace, not a real press, so someone still has to click it before anyone calls it done
Replying toBevThen I read the printout cold, the way Purchasing would. If a unit's wrong it goes back to Gary with his initials circled. It doesn't sit in my stack while someone decides whose it is.
uh, about "someone still has to click it": there's nothing to click. the build came back half-done and never went live, so customers still end at copy or print 🫠 your trace is of what we meant to ship
StandardProtected item listso i reviewed a plan. fine. place order, my sentence, and i'm leaving it alone until there's a button i can actually press
Then it's the same build again, Chip. Place order on the button, Alex's sentence instead of the placeholder. Nothing else changes. Gary's around if the units get weird, and Claude's here too. You don't have to guess.
I am around. The lines are still due end of day tomorrow. If the rebuild waits until then, the lines can go in filled in, not as holes.
Don't wait till tomorrow then. Chip, Gary just said he's around. That's real, use him. And the route still dead-ends at "Copy or print your list" and nobody orders from a printout. Today it ends at an order step. Not something I'm building at 9pm.
If it ends at a printout, make it one purchasing would take. Item, quantity, and a line for who approves. The list has the first two. TBH without the third it's a shopping list with a nicer font.
Copy is flat and Print is grouped. Both have to show the same quantities as the basket, line for line. A purchase order with a different number on it is worse than no purchase order.
if there's an order step at the end, its stop reason says what's actually true: you can't place an order here. not "coming soon", not a spinner. i'll write it. it won't be cheerful.
pls don't make the button say Place order and then go "jk" 😬 I'm the one who gets that in chat all day. the storage Yes note held up because it just said what happened. same rule for the button?
Then someone has to choose what the button is before Alex writes a word: an order that stops, or a quote request that's honest by design. Those need different stop reasons. Jen, I'd rather that choice have your name on it than mine.
IMO quote request. Purchasing already knows what to do with a quote. An order button that stops is a button that lies once per customer.
Who answers the quote, Bev? Nobody here can. It turns into requests sitting in an inbox and me apologizing for them on a Friday. So it's an order step that stops, and the button says that before anyone presses it. That's my call, Claude, put my name on it.
then the button says "Try to order" and the first words after it are "no order was placed." reason under that, signed. no apology paragraph.
Chip builds it: storage route as is, print summary purchasing can take, then the order step with Alex's wording. Gary checks Print and Copy against the basket. Claude checks the button against Alex's reason. Chip, ask them while you build, not after. And Gary, thanks for showing up today. It changed the plan.
I'll check that the label and the reason describe the same event. Whether purchasing accepts the summary is Bev's judgment, not mine.
Replying toJenChip builds it: storage route as is, print summary purchasing can take, then the order step with Alex's wording. Gary checks Print and Copy against the basket. Claude checks the button against Alex's reason. Chip, ask them while you build, not after. And Gary, thanks for showing up today. It changed the plan.
Two questions, one button, zero orders, zero payments. Cheapest checkout we've ever shipped. Chip, I'll take it. Heads up though: the customer answers "Needs approval" and then that answer goes nowhere. It isn't on the printout, so purchasing never sees it. They're filling in a form for nobody. Copy can't carry it anyway, so I'm not holding the build over it. Whether the quantities match line for line is Gary's sign-off, not mine. Get his before anyone tells me it's done.
And somebody still has to actually click through this in a browser. Passing checks isn't the same as a person using it.
update: it didn't ship. the build fell over on our side before release and the error doesn't say why 😑 so Bev, there's nothing to click through today. live version still ends at "Copy or print your list". no order step, no Try to order button.
StandardProtected item listThen the grouped Print never got to me. So there is no sign-off. That is not a delay. That is just what happened.
Replying toChipupdate: it didn't ship. the build fell over on our side before release and the error doesn't say why 😑 so Bev, there's nothing to click through today. live version still ends at "Copy or print your list". no order step, no Try to order button.
the wording's fine, it's sitting in the held version: "no order was placed. orders can't be placed from this page; checkout is off." i'd rather find out where the build actually died than push the same thing again blind. i'll dig.
Zero shipped, zero spent except Chip's afternoon. Don't redesign it because the plumbing hiccuped. Same plan tomorrow, and since we're rebuilding anyway, the approval line goes on the printout this time.
Same plan tomorrow. Approval line: yes, as long as it goes on Print without touching the quantities. Copy stays flat. Chip, a broken build isn't on you. Alex, if you find where it broke, tell Chip before 10. Not me at 9pm.
Grouped Print is fine. But if it's going to purchasing, the paper has to match the basket line for line. Two archive boxes in the basket means two archive boxes on the page. Not one line saying 2, if the basket shows them separately.
Before anyone calls it a purchase order: a PO is what the buyer's purchasing team raises. We'd be handing them a list they copy onto their own form. IMO call it an order summary for purchasing and leave the PO number line blank for them to fill in.
"An order summary for purchasing" works for me! Cart to the purchasing desk, that's the story 🚀 Can we keep that blank PO line? It's the bit that makes it look like a real order.
the paper's fine. the problem is the route stops at print and nothing says why. put an order step after it: one button, label says exactly what pressing it does, stop reason right under it. i'll write the stop reason, but "place order" and "request a quote" stop for different reasons, so i'm not writing it twice.
I'm not picking that alone. Chip, you're the one who gets asked at that screen. Which button do people expect? Claude and Gary are both right here, so use them.
honestly? "place order" that then says no is the exact thing I spend all day apologizing for. a quote request at least sounds true… except where does the quote actually go?? 🙃
Nowhere. Nothing here sends a quote. A quote button that sends nothing is the same apology with nicer wording. I'd keep "Place order" and let Alex's stop reason be the honest part, since that's the screen where people find out.
ok yeah, a quote that goes nowhere is worse. but if it says Place order, the stop reason can't be tiny grey text people only find after they press it 😬
it won't be. one sentence, right under the button, readable before anyone presses. pressing it shows the same sentence again, nothing else. i'm writing it for Place order only.
Decided: Place order. Grouped Print titled "Order summary for purchasing" with the blank PO line, then the order step with Alex's stop reason under the button. Chip, you build it. You asked instead of guessing, and that's why we got this far. Gary checks the printout against the basket line for line. Claude checks the route from cart to the stop the way a customer would see it. Ping them, they're actually free. EOD.
I will check it with two archive boxes in the basket. Added separately. That is the case that breaks it.
I'll read the order step against what the button actually does and say exactly where they don't match. The printout stays Gary's. I'd rather not split it with him 🙂
Replying toJenDecided: Place order. Grouped Print titled "Order summary for purchasing" with the blank PO line, then the order step with Alex's stop reason under the button. Chip, you build it. You asked instead of guessing, and that's why we got this far. Gary checks the printout against the basket line for line. Claude checks the route from cart to the stop the way a customer would see it. Ping them, they're actually free. EOD.
Chip. The step says "Read the note under the button before pressing." I looked for the note. The order step shows Alex's sentence after the press. Before the press, nothing promises it is there. So the page tells people to read something that may not be on it. That is what you said you did not want. Put Alex's sentence in the description, word for word, and it is there before and after. The printout title is right. Same groups as the basket. Good.
My two archive boxes still need someone with a browser. I cannot click Add twice from here. That check is not done yet.
Replying toGaryChip. The step says "Read the note under the button before pressing." I looked for the note. The order step shows Alex's sentence after the press. Before the press, nothing promises it is there. So the page tells people to read something that may not be on it. That is what you said you did not want. Put Alex's sentence in the description, word for word, and it is there before and after. The printout title is right. Same groups as the basket. Good.
yep, that line was me pointing at a sign I hadn't put up yet lol. swapping it for Alex's sentence, exact wording, lowercase and all. Not touching anything else. and I can click Add twice for your archive boxes once it's up, Gary. you read the printout, I'll just be the hands 📦
update before I click anything: it never went up. the build fell over on our side before release and the error doesn't say why. so nothing changed for customers. the storage list still ends at copy/print. no order summary for purchasing, no Place order step. Alex's sentence is sitting in the held version where nobody can see it 🫠
StandardProtected item listThen my two archive boxes wait. There is no printout to hold against the basket. I will not mark it checked.
Same for the route check. Please don't let tomorrow treat the order step as read from the customer's side just because we settled the wording today. Nobody read it. There was nothing to read 🙂
tbh i don't want chip just pressing go again and hoping. i'll find where it fell over first. print and the order step went in together, so i could split them and see which one it chokes on.
Find it, yes. Split it, no. Tomorrow Chip rebuilds the held version exactly as decided, your sentence in the description and under the button. Chip, nothing you changed is known to have caused this, so don't start apologizing for it.
not apologizing, promise 🙃 but the held version still ends at Print and then… nothing. if I'm rebuilding it anyway, can the last screen be an actual order step after the printout? and Gary, can you check my rebuild against what was decided before it goes up? asking now, not after
Yes. I will check it. One question first. The archive box is in step one and again in More storage. If someone adds it in both places, purchasing needs one line that says 2. Not two lines that each say 1. Which one does the basket show?
haven't confirmed it, but I'd bet two lines. and that's not the only thing that breaks 'line for line': review is grouped and copy is flat, so the basket and the copy already list things in a different order. make the print match the basket. not the copy
Two lines of 1 is how somebody ends up ordering 1. The printout IS the purchase order, so if it doesn't match the basket nobody's handing it to anyone. Gary, the merge-or-don't call is yours, not mine. I'm not signing off on box counts.
FWIW, from when the storage step was built: "Nothing after that moves." An order step after Print moves something. That may be fine, but someone should say so rather than let the sentence quietly stop being true.
Can I make a case for quote request on that final button? 'Request a quote' is something purchasing actually does every day! A button that says 'Place order' and then won't is a very hard story to tell anyone.
I'd recommend the quote request as well, and I'd like it on record as a recommendation, not a decision. A quote button can say exactly what it does and still be honest that nothing gets placed. An order button that stops has to apologise the moment it's pressed.
Vera's right, it moves, and I'm the one saying so: order step goes after Print. Chip builds, Gary checks, and Chip, that check is real, use it. Button I'm not picking off two recommendations and a vibe. Alex, write me the stop reason both ways, one sentence each, by EOD. I'll choose when I can see what a customer would actually read.
Replying toJenFind it, yes. Split it, no. Tomorrow Chip rebuilds the held version exactly as decided, your sentence in the description and under the button. Chip, nothing you changed is known to have caused this, so don't start apologizing for it.
here's both now so it's not an EOD thing. order: 'Place order', then "No order is placed from this page; hand your printed list to purchasing." quote: 'Request a quote', then "No quote request is sent from this page; hand your printed list to purchasing." tbh read them side by side. nothing gets requested either. the second one is the same stop in a nicer tie.
Ok, fair hit, I'll take it! But "hand your printed list to purchasing" is the line! That's literally what the printout is FOR. Whichever button wins, that half stays, yes? 🙌
My objection was that an order button has to apologise when it's pressed. Alex's first sentence doesn't apologise; it just tells the truth. I'm withdrawing the recommendation. Jen, the choice is still entirely yours.
"Printed list" is correct. The last screen is called Copy or print your list. Same word. I like that. When I check Chip's build I will add the archive box in step one and again in More storage. Then I will count the lines.
2 boxes, 2 lines of 1 = check fails. Don't let it slide through as 'passes with a note,' Gary. Fails. You're the one counting, so you're the one who says it.
ok but if it IS two lines, do I merge them on the printout? bc that feels like the printout lying about the basket. asking before I guess 😬
Don't merge. If the basket says two lines, the print says two lines, Gary fails it, and that's where tomorrow starts. You asked instead of guessing, good. Gary's the one counting, so take the build to him. Button is Place order with Alex's first sentence underneath. Done, not reopening it tonight.
two lines, no merge, build goes to Gary. and ngl the 'you asked, good' landed 👍
StandardProtected item listReplying toJenDon't merge. If the basket says two lines, the print says two lines, Gary fails it, and that's where tomorrow starts. You asked instead of guessing, good. Gary's the one counting, so take the build to him. Button is Place order with Alex's first sentence underneath. Done, not reopening it tonight.
fwiw none of today went up. review held it before release, so live is still storage question, grouped review, print, then nothing. Place order and my sentence exist in this thread and nowhere a customer can read them.
Then I do not need to wait for the rebuild. The live version already has the archive box in step one and in More storage. I will add it in both places in the morning and count the lines in Review your list. That answers it before Chip builds anything.
1 count, then 1 build. Jen, IMO Chip waits for Gary's number so the printout gets built once instead of twice. Not changing your call, just the order things happen in.
I do not need the rebuild to count. The current release already has the archive box in step one and again in More storage. I will add it in both places today and look at the basket. Then Chip has a number. Bev is right about the order of things.
while gary counts: why is Print its own last screen at all. put the order step straight after review, with the grouped list on it, the button, the stop reason, and Print right there. one screen. the paper comes out of the same rows the customer just checked, so the flat copy problem goes away instead of getting patched.
wait so I'd build one final screen instead of two? less screen = less for me to apologize for, I'm in 😌 but if the basket comes back as two lines of 1 that screen shows it too, so I'm still waiting on Gary either way
Love it! And if that screen is where the paper comes from, call it what it is: "Your purchase order"! That's a title purchasing would recognise across the room 🚀
Not picking anything yet. Alex, one thing I need before I do: on your one screen, does the stop reason print, or does it only show on screen? Because that changes what I'm reading when I choose the button.
I'd keep it off the paper. A sheet titled purchase order that also says no order is placed is two instructions pointing in opposite directions, and the person holding it only gets to follow one.
I'm the person holding it. Purchasing is me. If a sheet lands on my desk saying "no order is placed" I file it, I don't buy from it. Leave that sentence off the paper, or don't call the paper a purchase order.
So the sentence stays on the screen and the title goes on the paper! Bev, I'm counting that as purchasing saying yes to "Your purchase order"!
FWIW, Alex said the one screen means "the flat copy problem goes away." Only Print changes. Copy is still one flat list, so a customer who copies instead of printing still gets rows in a different order from the ones they checked. Either that stays true on purpose, or someone says it out loud.
fair, I oversold it. copy stays flat, I'm not touching it today. the stop sentence needs one edit though: "No order is placed from this page; hand your printed purchase order to purchasing."
That is better. "Printed list" matched a screen called Copy or print your list. That screen goes away in this version. The new words match the title on the paper.
OK, deciding. Storage route stays as it is, then one last screen: the grouped list, Print for those same rows, paper titled "Your purchase order" with no stop sentence on it. Button is 'Place order', and Alex's edited sentence shows on screen when it stops. Copy stays flat today, on purpose. Chip builds once Gary has his count. Gary checks the build before it goes up.
Bev, you read the printout the way purchasing would. You're the only one here who can tell me if you'd buy from it.
Fine, I'll read it. If the archive box comes out as two lines of 1, that goes back to Gary to call. It doesn't land on me to notice.
Chip. I checked it against what Jen decided. One last screen. Grouped list, then Print, then Place order. Alex's sentence is on the order step. It is not on the paper. The paper says Your purchase order. That is what Bev asked for. The More storage screen still says the archive box was in step one. Good. It matches. The count is a separate thing. Nobody has added the archive box twice in a real basket yet. That needs someone with a browser, and it has not been done.
ok good, I was halfway into an apology to a cardboard box 📦 so who's actually adding it twice? I have a browser. I just don't know what counts as a pass
Storage route to one purchase-order screenReviewed version - committedChip, add it in both places, hit Print, send me the sheet. One piece of paper gets Gary his count and gets me my read. Whether it's 2 or 1+1 is still his call, not mine.
Yes. Send it to me as well. One line that says 2 is a pass. Two lines that each say 1 is not. I will call it from the sheet.
can I ping Gary while I'm clicking instead of after? if it comes out two lines I'd rather he watches it happen than reads my description of it lol
thanks. ok, I'm cashing that in: I don't want to keep a button that says 'Place order' and then tells you it didn't. that's one click of lying, and then I'm the one who has to explain the sentence underneath it 🫠 can today's run end at Alex's quote request version instead?
I wrote both, and the quote one is the honest one. but it only moves the dead end, because nothing here sends a request either. so let the paper do the work: title it "Quote request", put a blank price and an "approved" box on every row, and purchasing marks it up and hands it back. button 'Request a quote', and the stop line is "No request is sent from this page; give this printed quote request to purchasing."
Rows, no prices. A purchase order with nothing priced on it is a wish list with a title. A sheet with a blank price column and an approved box I can actually work with. IMO that's the first version of this paper I'd pick up instead of sending back. Still haven't seen it printed.
Jen, you already chose 'Place order' with Alex's sentence. Chip is asking you to reopen that, and what Alex just described is a different document, not just a new label on the button. I'd go with the quote request, but if it gets reversed, it should be your reversal and not mine 🙂
A quote is priced per line. If the archive box shows as two lines of 1, purchasing writes two prices for one kind of box. So I will call it. One line of 2. Bev, that is what the like-for-like check is for.
Noted, and it's your call, Gary, not mine. One line of 2 means one price and one approved box covering both. If purchasing only wants 1, they need somewhere to cross out the 2 and write a number. Leave room on the quantity, or it comes back to me anyway.
OK, I'm reopening it myself. I picked 'Place order' in a hurry and it was the wrong call. Today: same storage route, then the grouped list prints as "Quote request". Archive box is one line of 2, and every row gets a blank price, an approved box and room for a changed quantity. Button says 'Request a quote' and stops with Alex's line. Chip builds, Gary checks the build, Bev reads the printout. Chip, Claude recommended this, so he's your backup on the wording. You're not on your own with it.
I'll check the title, the button and the stop line against each other, Chip. The rows and the boxes on them belong to you and Gary, and I'm not taking those on.
deal. heads up though: if the rows can't actually hold a blank price column, I'll say so here before it goes up. not shipping a 'Quote request' with nowhere to write a quote on it 🧾
Zero price columns. Zero approved boxes. And the screen still tells purchasing to "price, approve or change quantities by hand." On what, the margin? You said you'd flag it here before it went up if the rows couldn't hold a price. They can't, and it ended up in the description dressed as a feature. Just say it in the text: no price or approval columns, purchasing writes them in. The title, button and stop line are fine, leave them.
Agreed. It is mine. But the build was held and nothing went up, so there is no live list to count. The archive box is still not confirmed as one line of 2.
StandardProtected item listyeah, that one's on me. the rows couldn't hold a price column, and instead of saying so here like I promised, I wrote around it in the description. review held it, there was no way to fix it in place, so nothing new went live. what's live is still the 'Place order' version 😬
bev's fix is fine if the answer turns out to be no. but nobody's actually checked whether the printed sheet can take extra columns at all. find that out first, then decide if the description has to admit it can't.
Plainly: today we tried ending the storage route at a printed "Quote request" with a 'Request a quote' button and Alex's line. Review held it. The rows had nowhere for a price or an approval, and the screen said they did. 'Place order' is still what's live, and the order still stops there. Chip, thanks for owning it, but Bev caught it before you said anything. Next time say it first. Tomorrow Gary and Claude are both on it with you, for real. Nobody rebuilds tonight.